The DigiVolt® series of digital voltmeter and phasing sets is designed to take voltage measurements and perform phasing applications on system voltages up to 80kV. There are six different models. The DigiVolt-80 digital voltmeter is a compact, high accuracy dual stick voltmeter and phasing set with connecting cord. The DVM-80 digital voltmeter measures voltages up to 40kV and up to 80kV with a pair of optional add-on resistors. The two-stick design can be used in both overhead and underground applications. The DVM-80 digital voltmeter incorporates Phase Accurate Technology, which makes all voltage readings, whether made from line-to-line or line-to-ground, accurate and repeatable to within 1%.
The NEW DigiVolt-80T digital voltmeter includes an elbow test point mode, which is displayed by a blinking decimal point. Simply press the ON button to active and de-activate this feature.
The DVM-I and III are single-stick units with a ground lead designed for taking line-to-ground measurements up to 20kV. The DVM-II and IV are two-stick units for taking line-to-ground and line-to-line measurements up to 50kV. The DVM-III and IV also include a Capacitive Test Point mode. This allows for taking voltage measurements and performs phasing directly from the capacitive test points on the backside of load-break elbow connectors. The less expensive and smaller DVM-V, a two-stick unit for measuring and phasing voltages to 20kV, does not include Peak Hold mode or Capacitive Test Point mode.
MODEL
RANGE (kV)
LENGTH WITH OH PROBE
PEAK HOLD MODE
CAPACITIVE TEST POINT MODE
HOTSTICK REQUIRED
DVM-80 Dual Stick
0-80 with add-on resistors
18" (46cm)
1
1
X
DVM-80T Dual Stick
0-80 with add-on resistors
18" (46cm)
1
X1
X
DVM-I Single Stick
0-20
31" (79cm)
X
1
X
DVM-II Dual Stick
0-50
31" (79cm)
X
1
X
DVM-III Single Stick
0-20
31" (79cm)
X
X
X
DVM-IV Dual Stick
0-50
31" (79cm)
X
X
X
DVM-V Dual Stick
0-20
23" (58cm)
1
1
X
OPTIONAL DIGITAL VOLTMETER ACCESSORIES
• Bushing probes for use in 15kV, 25kV and 35kV class bushings
• Cable Fault Tester for testing cables for faults
• Proof Tester® for verifying proper operation of voltmeters/phasers prior to use
• Extension hotsticks in various lengths
• Various overhead and underground probes
DIGITAL VOLTMETER FEATURES
• True RMS voltage measurements up to 80kV AC/DC
• Large auto-ranging LCD (models DVM-I through DVM-V)
• Back lit display for low light conditions
• Coiled connecting cord is standard (optional reel cord available on DVM-I through DVM-V)
• Peak hold and track modes (models DVM-I through DVM-IV)
• Auto shut-off
• Low battery indicator
• Capacitive test point mode (models DVM-80T, DVM-III and DVM-IV)
• Universal splines for standard hot stick attachment
• Powered by 9-volt alkaline batteries (one battery for DVM-80 units, two batteries for DVM-I through DVM-V)
• All models include a carrying case
• Includes hook style overhead brass probes
Click here to download the Brochure for the NEW DVM-80 and DVM-80T Digital Voltmeter / Phasing Set.
Click here to download the Brochure for the complete line of Digital and Analog Voltmeters.
Click here to download the Instruction Manual for the complete line of Digital and Analog Voltmeters..
To view this file or any of the files on this page, you will need to have Adobe Acrobat Reader installed on your computer. To get the free download of Acrobat Reader, click on the icon.
HD Electric Company is committed to ongoing review and improvement of its product lines, and thus reserves the right to modify product design and specifications without notice.
NEW DVM-80 Digital Voltmeter / Phasing Set
DVM-IV Digital Voltmeter
Analog Voltmeters
The MARK® series of analog voltmeters/phasers is designed to take voltage measurements and perform phasing applications on system voltages up to 75kV. There are numerous versions with single and multiple ranges for use on multiple system voltages. These include one-stick models with a ground lead and two-stick models with a connecting cord.
Model
Range (kV)
Length w/Overhead Probe
Hotsticks Required
Mark I Single Range
0-15
23" (58cm)
1X
Mark II Dual Range
0-15/0-45
32" (81cm)
1 X
Mark III Dual Range
0-15/0-75
23" (58cm)
1 X
Mark IV Single Range
0-5
23" (58cm)
X
Mark V Dual Range
0-5/0-15
23" (58cm)
X
Mark VI Triple Range
0-5/0-15/ 0-45
23" (58cm)
X
Mark VII Dual Range
0-1/0-15
23" (58cm)
X
Mark VIII Single Range
0-15
26.5" (67cm)
X
Mark IX Single Range
0-25
27" (69cm)
X
Mark XI Dual Range
0-5/0-25
27" (69cm)
X
Mark XII Single Range
0-40
31" (79cm)
X
The EM models are single-stick units with a ground lead for taking line-to-ground measurements.
Model
Range (kV)
Length w/Overhead Probe
Hotsticks Required
EM-1 Single Range
0-16
28" (71cm)
X
EM-2 Single Range
0-25
34" (86cm)
X
EM-3 Dual Range
0-1/0-15
30" (76cm)
X
OPTIONAL ACCESSORIES
• Bushing probes for use in 15kV, 25kV and 35kV class bushings
• Cable Fault Tester for testing cables for faults
• Proof Tester® for verifying proper operation of voltmeters / phasers prior to use
• Extension hotsticks in various lengths
• Various overhead and underground probes
FEATURES
• Numerous models with different ranges
• Large 3" meter face for easy reading
• Coiled connecting cord is standard (optional reel cord available)
• Strain relief fittings at end of cords reduce cable damage
• Units available with universal splines for use with hotsticks
• Adaptable for underground applications with accessory probes
• Includes hook style overhead brass probes
Click here to download the Brochure.
Click here to download the Instruction Manual.
To view this file or any of the files on this page, you will need to have Adobe Acrobat Reader installed on your computer. To get the free download of Acrobat Reader, click on the icon.
HD Electric Company is committed to ongoing review and improvement of its product lines, and thus reserves the right to modify product design and specifications without notice.
.
ÜRÜNLERİMİZ
ÜRÜNLERİMİZ
