Just snap the head onto meter or use the deluxe silicone leads for remote connection.

• Non-contact Voltage (HS30's)
  Loud beeper and bright LED indicate the NCV tab is near AC voltages down to       24VAC.

• True RMS (HS36)
  Get the true voltage and amperage when testing variable speed fans or other non-sine wave applications.

• Auto-ranging (HS35,HS36)
  Automatically changes range for best resolution.

• Temperature (HS30's)
  Thermocouple plugs in directly for accurate readings, even in fast changing environments.

• Microamps (HS26,HS35,HS36)
  For flame rectifier diode tests.
• Capacitance
  For motor-run and motor-start capacitors.
• Frequency (HS35,HS36)
  For variable frequency drives.
• Rugged rubberized case with
  magnetic hanger (HS30's).
• Hi-voltage indicators you can’t miss--both LED and beeper turn on to indicate you’ve touched a potentially dangerous voltage.
• Continuity indicated by LED and beeper.
• MAX hold automatically holds reading so you can look at the meter after you’ve disconnected.
• Low ohms ranges for motor windings and mid range for thermistors.
• HS36 comes with a backlight.
• Auto-power off to extend battery life.
• UL Cat III 600V.

Hang It
For safe and easy testing, hang the meter using the magnetic hanger.

Safe voltage
For maximum safety, clip one lead to ground and test with one hand.

Remote It
For hard to reach test points, remove the probe tips and connect to ACH current clamp head.

HS26 - HS33 - HS35 - HS36
Unique Features for HVAC/R

Test Lead Solutions

• Probe storage in the back. Just snap them in (HS30's).
• Removable probe tips
  for connection to most
  accessory heads.
• Attach detachable probe tip
  directly into jack for easy and
  safe voltage testing.
• Silicone wire test leads
  remain flexible in cold
  weather, withstand caustic
  chemicals, and work well in
  temperatures that will melt
  vinyl leads.
• Leads conveniently
  wrap around meter (HS30's).

HS26 comes packaged inside the padded ANC7. A 400AAC clamp head (ACH4) is included. Just slide the clamp onto the top of the HS26 meter to read amps. Also included are deluxe silicone test leads, alligator clips, battery (installed), and operator’s manual.